[Kgkeen101]

I am looking for parts required to convert my 2.5 to 1.8, making a gas friendly daily. Just swapped my 3.5 swap and doing another conversion, what the hell right haha. Anyway, I am looking for motor mounts, front and rear and side and tranny, I already have a cross member, axles, tranny, and spindles. Also looking for shift cables, engine harness and ecu. Ecu from a non abs, non security 5 speed 1.8 manual. If there is anything else I may need, any help will be appreciated, thanks.

 

[Kgkeen101]

Anyone have the crossmember, tranny mount, bracket for the motor mounts, need all 4, PM if you have them! Thanks.

 

[Kgkeen101]

Was also looking for a 1.8 ECU for a non abs 5 speed manual 2002 sentra and the engine harness too.

 

[i68k]

you were probably better off buying a parts car, you dont even have half the stuff listed you need to swap in the qg18 from a qr25. you need all the rest of the electronics, maf, tb, gauges, pedal, etc, including the ecu. here is a how-to swap to a qr25 from a qg18, so just reverse everything to qg18 items:

http://www.b15u.com/engine-swaps-builds/21446-qg18-qr25-swap.html

 

[Kgkeen101]

I've been gathering a lot, it is a long story, I have a 60k spec v 2002 chassis, brand new suspension, brakes, wheels, paint, clean interior, just making a new daily. It's a project but hey I think the 35mpg + hwy will be worth it imo =). The 2.5 gets the same mileage as the 3.5 so I figured if I'm getting my car to drive again might as well do a proper daily that I won't be tempted to turbo or anything lol.

 

[Kgkeen101]

Thanks for the recommended thread. Worst case scenario, I'll throw a standalone and run it how I ran my 3.5 VQ.

 

[Kgkeen101]

WTB 1.8 OEM Flywheel with bolts and Crank Pulley/Harmonic Balancer with bolts, shipped to 33067, let me know if you have available, thanks!

 

[nismos13silvia]

I've got the crank pulley with the bolt. Email me at [email protected] for reply. I'm not there that often.

 

[Kgkeen101]

Ah already had to grab one from a salvage yard local, thanks though.