B15 Sentra Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter #1
I have a little problem. I have a blue remote wire running from my sub,but where exactly do I put it? I know on the back of the stock HU somewhere,but where?

Also, I have a line output converter ,where do I tie it?

please include an pic if possible,ty :)
 

·
Spec-V Specialist
Joined
·
411 Posts
Tie the rca converter in at the rear speakers. The remote wire if your using the stock headunit can be run from the fuse box to the amp. Make sure the fuse you run it to shuts off with the ignition tho.
 

·
Registered
Joined
·
5,293 Posts
find a fuse that turns on and off with the ignition, and connect your remote wire to that one
 

·
Registered
Joined
·
62 Posts
Discussion Starter #6
So,just find the fuse and stick the remote wire into the slot where the fuse go?

Also what wires do I split to install an Line Output Converter?
 

·
Registered
Joined
·
242 Posts
o0birdman0o said:
So,just find the fuse and stick the remote wire into the slot where the fuse go?
I havent done this in years but I think you just wrap the exposed wire around one side of the fuse's metal prongs. Then plug the fuse in nice and firm. Is that right?
 

·
Registered
Joined
·
1,208 Posts
you could do it that way...thats the easier way....the safer way would be finding the wire on the back that goes to that fuse and splicing it in there
 

·
Registered
Joined
·
62 Posts
Discussion Starter #9
I got it, I took the wire and stuck it up in the air cond. fuse and plug the fuse on top of it. Everything works nicely,ty. Also for the LOC I just put it on one of my rear speakers. :)
 

·
Registered
Joined
·
869 Posts
Another good place would be to find ur accesory wire for the HU itself. Thats how i did mine. Except i ran it off the 6Disc Changer. and forsome reason the Changer in the SE likes to stay on even if the car is off so i had to put in a switch. Just temp though beacuse ill have my new HU soon.
 
1 - 10 of 10 Posts
Top