B15 Sentra Forum banner

1 - 20 of 20 Posts

·
Registered
Joined
·
311 Posts
Those custom grilles look so sweet... I've got to get around to making some for my ride! You definately have a good start. You've got to get a new plate, though! :)

------------------
Samo

1994 Sentra E
"The Ghettoblaster"

Hit me up on AIM at Samo94Sentra!
 

·
Registered
Joined
·
1,540 Posts
Discussion Starter #3
Thanks. I will take a lot more pics for the Stromung and CAI when I get them on. And I am in the process of changing the plate lol. I know it looks really gay

------------------
2001 Blackout Se with PP
 

·
Registered
Joined
·
311 Posts
Chrissy just told me that I'm on your site! Thanks a bunch for putting my ride on there! Yay! That just made my day! :)

------------------
Samo

1994 Sentra E
"The Ghettoblaster"

Hit me up on AIM at Samo94Sentra!
 

·
Registered
Joined
·
1,540 Posts
Discussion Starter #5
If you want to check it out go to the link below. I haven't gotten around to taking off the thing at the top yet but I will try to do it this weekend.
http://nismogirl2001.nismo.org/photo2.html

Also if anyone would like their pic on my site just let me know. I am looking for more Nissan's b.c right now its mostly Honda lol.


------------------
2001 Blackout Se with PP
 

·
Registered
Joined
·
311 Posts
If you want, I'll e-mail you a better pic and some more info about my ride.

------------------
Samo

1994 Sentra E
"The Ghettoblaster"

Hit me up on AIM at Samo94Sentra!
 

·
Registered
Joined
·
297 Posts
Hey how did you make those grills, the car looks really nice, I won't be posting any pics of my car until the project is done, well when phase I is done I will send plenty of pics. (Phase I = CAI, Stromung, CF Hood, UR 4 Pulley Set, SS Brake lines, Shift Kit, 1000rpm or more over stock stall torque converter). Most of the stuff will be done in the next two weeks. I shoul be posting some dyno charts then.

------------------
formerly known as JCGator42, 2k1 Nissan Sentra SE w/PP mods: Cold Air Intake by Hotshot, and Stromung Cat-Back Exhaust(on its way over here), and Unorthodox Underdrive 4 pulley set(in a couple of weeks) [email protected]
 

·
Former Boosted B15
Joined
·
1,652 Posts
You should hook me up on your site also...., i will take new pics tomorrow at the car cruise....I will send you some if you want

------------------

Sportin Da ILL 2000 SE, Greddy Exhaust, HID Hyperwhite Head bulbs, Turn Signals, and Fogs, Free Intake Mod, 35% Mirror Tint, Custom Made Grill, Vinyl Eye lids, Gas Cap holder, Sound system w/Amp, 1 1/2" Dome Tweets, and Sub...BOOM!...Primax 15" 10 spoke Racing Rims
 

·
Former Boosted B15
Joined
·
1,652 Posts
You should hook me up on your site also...., i will take new pics tomorrow at the car cruise....I will send you some if you want

------------------

Sportin Da ILL 2000 SE, Greddy Exhaust, HID Hyperwhite Head bulbs, Turn Signals, and Fogs, Free Intake Mod, 35% Mirror Tint, Custom Made Grill, Vinyl Eye lids, Gas Cap holder, Sound system w/Amp, 1 1/2" Dome Tweets, and Sub...BOOM!...Primax 15" 10 spoke Racing Rims
 

·
Registered
Joined
·
778 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by 2k1DragSentra:
Hey how did you make those grills, the car looks really nice, I won't be posting any pics of my car until the project is done, well when phase I is done I will send plenty of pics. (Phase I = CAI, Stromung, CF Hood, UR 4 Pulley Set, SS Brake lines, Shift Kit, 1000rpm or more over stock stall torque converter). Most of the stuff will be done in the next two weeks. I shoul be posting some dyno charts then.

<HR></BLOCKQUOTE>

keep me posted on your progress with your torque converter, a very important subject.


------------------
2000 sentra se
pp, 5spd
 

·
Registered
Joined
·
3,122 Posts
Hey Nismo girl,,,

I am a little dissapointed :(
your car looks like my sister car and you don't have a pic of mine on your site,,SNIFF SNIFF.....

I thought we was family :D J/K ;)

------------------

MODS:
17x7 Konig-Caffeine's ,Stillen front spoiler,Aluminum dash kit,Remote starter,35% Tint,Aluminum Pedal Kit,Ventshade-ventvisors,Custom Front Grille,Stromung Cat-Back,Place Racing CAI
*CLICK HERE FOR MY CAR PICS* ***My Website***
 

·
Registered
Joined
·
1,540 Posts
Discussion Starter #12
Hey Styling. I didn't want to post it without your permission thats the only reason its not up there. I don't want anyone to get mad b.c I used a pic of their car without an OK from them personally. So if its cool with you I would love to post a pic of your car on my site.

And we are all family lol

For everyone else YES I WANT PICS

And on the grilles. I didn't use gutter guard. I used a square mesh. I had it left over from the grilles I made for my civic. I did a double layer b.c one layer was to thin. Because it is a square mesh I just bent it over to make it double thinkness. When I did I made sure that the squares were just a tad bit off so that it has more of a full look to it. I am going to redo the bottom grille b.c it is hard to tell it is there right now b.c I didn't make it 2 layers lol. I should start making them and selling them or something lol.

------------------
2001 Blackout Se with PP
Custom Grilles, Stromung is on order and PRI CAI is comming soon.
 

·
Registered
Joined
·
3,122 Posts
how did you attach the bottom one???

I made a template sorrta thingy and attached the gutter guard to that and stuck it on the bottom piece of the bumper...but yes you can use my pic I have no problems with that :)

------------------

MODS:
17x7 Konig-Caffeine's ,Stillen front spoiler,Aluminum dash kit,Remote starter,35% Tint,Aluminum Pedal Kit,Ventshade-ventvisors,Custom Front Grille,Stromung Cat-Back,Place Racing CAI
*CLICK HERE FOR MY CAR PICS* ***My Website***
 

·
Registered
Joined
·
1,540 Posts
Discussion Starter #14
Ok this may sound weird it worked really really well. What I did was make a template with a single layer of the mesh. I then made the final one about 2 inches longer left and right and about 5-6 inches wider top to bottom. It fit perfectly in the grooves on the side of the opening and at the top there is also a slot between the plastic and the syrafoam thingy. I just wedged it up at the top and bent the excess at the bottom so that it was kinda holding itself in place. Then i tied it with clear fishing line to the bottom row of the three little plastic pieces. The fishing line is just there for extra hold b.c it is wedged in there so good it doesn't really move at all. I know that is totally ghetto but it looks really good and works wonders. That way it is easy to take out and I didn't have to cut the bumper any. You can't see the fishing line what so ever either.

Call me crazy, or call me creative. lol

------------------
2001 Blackout Se with PP
Custom Grilles, Stromung is on order and PRI CAI is comming soon.
 

·
Registered
Joined
·
1,540 Posts
Discussion Starter #15
I did a little reworking of my website so now all of my Nissan friends will be on the same page . Enemigo and Styling I added pics of your car .Chrissy your car will be up as soon as yahoo lets me back into my mail lol.

Check it out
http://nismogirl2001.nismo.org/photo2.html

------------------
2001 Blackout Se with PP
Custom Grilles, Stromung is on order and PRI CAI is comming soon.
 

·
Registered
Joined
·
3,122 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nismo_Girl_2001:
I did a little reworking of my website so now all of my Nissan friends will be on the same page . Enemigo and Styling I added pics of your car .Chrissy your car will be up as soon as yahoo lets me back into my mail lol.

Check it out
http://nismogirl2001.nismo.org/photo2.html

<HR></BLOCKQUOTE>
Hey call me crazy and all but I just can't find it???


------------------

MODS:
17x7 Konig-Caffeine's ,Stillen front spoiler,Aluminum dash kit,Remote starter,35% Tint,Aluminum Pedal Kit,Ventshade-ventvisors,Custom Front Grille,Stromung Cat-Back,Place Racing CAI
<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1428062&a=10696175" TARGET=_blank>*CLICK HERE FOR MY CAR PICS*
</A> ***My Website***
 

·
Registered
Joined
·
1,540 Posts
Discussion Starter #17
What can't you find?

------------------
2001 Blackout Se with PP
Custom Grilles, Stromung is on order and PRI CAI is comming soon.
 

·
Registered
Joined
·
48 Posts
I would like to be on your site too. I have no exterior mods. The only upgrade I have is the leather interior, but if you want to post some pics of my car I would be honored :)
copy any of the pics you like from http://members.tripod.com/bopque/sentra/

------------------
2001 SE, Radium, W/PP. 17% all around tint, Dark charcoal leather interior.
 

·
Registered
Joined
·
3,122 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sentra Styling:
Originally posted by Nismo_Girl_2001:
I did a little reworking of my website so now all of my Nissan friends will be on the same page . Enemigo and Styling I added pics of your car .Chrissy your car will be up as soon as yahoo lets me back into my mail lol.

Check it out
http://nismogirl2001.nismo.org/photo2.html

<HR></BLOCKQUOTE>
Hey call me crazy and all but I just can't find it???
Never mind this nismo girl i found it :)


------------------

MODS:
17x7 Konig-Caffeine's ,Stillen front spoiler,Aluminum dash kit,Remote starter,35% Tint,Aluminum Pedal Kit,Ventshade-ventvisors,Custom Front Grille,Stromung Cat-Back,Place Racing CAI
<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1428062&a=10696175" TARGET=_blank>*CLICK HERE FOR MY CAR PICS*
</A> ***My Website***
 

·
Registered
Joined
·
35 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nismo_Girl_2001:
Chrissy your car will be up as soon as yahoo lets me back into my mail lol.
<HR></BLOCKQUOTE>

Cool, thanx Amy.
Gene I saw it. Look a little harder.
 
1 - 20 of 20 Posts
Top