B15 Sentra Forum banner

Taillamp question

881 Views 3 Replies 3 Participants Last post by  Enemigo
I still havn't lined everything up to get an SE yet. My Corolla still needs a couple of things before I sell it. I'm scheming for a custom taillamp treatment for the upcoming new ride. Does the lens seperate from the housing on the B15 lamps?

------------------
I wish my garage included '67 Toyota 2000GT, several years of 240Zs, my crunched '85 Supra, the last Supra and 300ZX Turbos, Lotus Elise, and my first, a '79 Celica GT.
1 - 4 of 4 Posts
2
kinda confused me there. not a difficult task to do.
if you are asking if the bulbs come out of the tail lamp assembly, the answer is yes.




------------------
MY PAGE
See less See more
No, asking if the LENS detaches from the HOUSING. I sell a lot of automotive lighting at my shop. We don't carry the 00-01 units yet. Many of these lamps have a lens and housing that are permanently attached with some kind of adhesive. If you get into an accident and crack the lens, you have to replace the whole unit vs just having to replace the outer lens which is the case with some vehicles. I want to know if there are screws back there holding the two together.

------------------
I wish my garage included '67 Toyota 2000GT, several years of 240Zs, my crunched '85 Supra, the last Supra and 300ZX Turbos, Lotus Elise, and my first, a '79 Celica GT.
I'm pretty sure they don't come out. I think its the whole housing instead of the lense. Because if they came out then they would have amde some kind of aftermarket mod to put there (eg.. Clear lense) I might be wrong, but i feel confident that they don't come out

------------------

Sportin Da ILL 2000 SE, Greddy Exhaust, HID Hyperwhite Head bulbs, Turn Signals, and Fogs, Free Intake Mod, Custom Made Grill, Vinyl Eye lids, Gas Cap holder, Sound system w/Amp, 1 1/2" Dome Tweets, and Sub...BOOM!
See less See more
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top