does anyone have an aftermarket pressure plate on there se
there seems to be a fitment problem with the clutchnet pp becauseour trannies have a hydraulic set-up as upposed the earlier set-up,,are other companies aware of this?
There is not enough throw on the clutchnet clutches for some reason. Even the cable operated trannies can't adjust enough movement into them. You could just use a thicker or thinner spacer on the actuator rod. There is one built in there already but you could build one a different size.
As for the other clutches you shouldn't run into any issues with them.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.