B15 Sentra Forum banner

1 - 3 of 3 Posts

·
Slappy McGear Slapper
Joined
·
913 Posts
Discussion Starter · #1 ·
Ok guys so my car is up on jacks right now, I got the stock sway bar loose but I cant get it out, washoping I wasnt gonna have to remove all those steering nuts/bolts to get it out. Any chance? I cant get a wrench to the steering bracket clamp, and I have NO idea how I'm gonna get that big center bolt out either. ANy advice would help, thanks all. Be back from my garage to check this intermitantly.
 

·
Slappy McGear Slapper
Joined
·
913 Posts
Discussion Starter · #2 ·
Damn, no love. Looks like Nissan will be installing this one. Damn :(
 

·
Registered
Joined
·
73 Posts
You can try with the rods from the steering off the knuckle this will give you some room to get it out. That's how I did it. I had the same problem and on the first day I gave up, but the next day wih some help from my brother and removing those tie rods, it came out in less than 30 seconds and the Nismo one went in the same amount of time. Good luck.

http://www.b15sentra.net/forums/showthread.php?t=88040
 
1 - 3 of 3 Posts
Top