B15 Sentra Forum banner

I need help oncerning crankshaft pulley holders!

1103 Views 5 Replies 3 Participants Last post by  JudoJohn
My friend is rebuilding my 02 spec v engine and is replacing the timing chain and to hold the crankshaft pulley he needs a crankshaft pulley holder, but the product is nowhere to be found!!! There IS, however, a camshaft pulley on amazon and ebay. Can that be used or is there another product I need? HELP please.
1 - 2 of 6 Posts
as far as I know, a bolt is what holds the pulley on. there is also a key that aligns the pulley properly. are either of these what you need?
I always use an impact wrench to remove the bolt. sometimes you need a puller to get the pulley off. If you don't have those, you can rent them.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.