How-To Reset: SES, SRS, ABS Lights

OkToBeR · May 5, 2004

edit NM: IDLE SPEED CONTROL!!!!

ok, what can i do to fix it?

here are two vids of the car in action. i took these like 1hr ago on the way home from classes. as you can see i was moving along, release the gas and depress clutch.

quicktime format-
video1: here

video2: here

towards the ends of both videos i re-engage the clutch.

SpecVcepS · May 5, 2004

make sure you plugged every sensor back in ?

OkToBeR · May 5, 2004

all harnesses and cables appear to be in their respective places. going to have to snoop around and maybe even redo what i did and backtrack my steps.

FLSpecV · May 5, 2004

Check the connections on the throttle body first...good luck

OkToBeR · May 6, 2004

still getting 0507 - ISC system code thrown. i took the IM/TB fully apart, and reassembled them to specs. i hope i didn't fry my Electric throttle control acuator. could this have anything to do with a MAF? i just don't understand how the car runs fine, but you let off the throttle and it idles high and it bounces up and down. going to have to go back and look at the FSM some more. if that doesn't work i'll buy the gaskets and then if that doesn't work, take it to the dealership.

avatarx · May 18, 2004

great post!

BlueSE-R_SpecV · May 18, 2004

*edit*

OkToBeR · May 18, 2004

just so everyone knows, this has since been fixed. see my thread "my adventure with 0507" for details. thanks for the help.

eastsidahboy · Jun 13, 2004

Everybody.... if could some body help me out about my question about my spec v... well... i had this topic already posted about my HS header with relocation of my secondary o2 sensor well.. the problem is, when i was installed the header i basically jump to the relocation of wires the needs to connect to the second cat underneath the car, but i didnt use the extension wire that the HS was included in the kit. instead, the people who help me out to do this, had their idea to replace the extesion wires to longer ones which obviously its a different wires. the problem now is SES light is on... after a month i decide to change the wires and i put the wire which is included with the kit but still SES light is still on after i did the relocation of secondary o2 sensor to the second catback everything??? do you guys have any idea what kind of engine code or number that appeared in the list who ever encountered this kind of situation hopfully some one could help me out about this.

SpecVcepS · Jun 13, 2004

why dont you check what code pops up, that way we can be sure as to what your car is telling you is wrong.

therealjoob · Jun 14, 2004

SpecVcepS do you mind telling me were and what the MIL light is? I have tried the procedure to check the ECM code several times now and have seen nothing happen.

eastsidahboy · Jun 17, 2004

well ok dude thanks ill check the code though....... actually... i know you are the one who posted the topic about the foot work in resolving your SES and ETC..... well i was doing the basics steps..... but still doesnt work on my car though.. can you give me some advice??

SilverSleeper86 · Jun 17, 2004

Does the clearing work for the QG18DE engine? I know why my SES light is on but I just want it off because I know what's wrong yet its not really a problem.

PhatVSpec · Jun 17, 2004

I know I did this for when I removed my seat and the airbag light came on and that crap didnt work. I needed nissan to reset it, I wish I had the software for a palm

SpecVcepS · Jun 17, 2004

eastsidahboy said:
well ok dude thanks ill check the code though....... actually... i know you are the one who posted the topic about the foot work in resolving your SES and ETC..... well i was doing the basics steps..... but still doesnt work on my car though.. can you give me some advice??

make sure that you are in the car, and all the doors are closed. if you leave one open, it wont work. (just closed, not locked)

SpecVcepS · Jun 17, 2004

PhatVSpec said:
I know I did this for when I removed my seat and the airbag light came on and that crap didnt work. I needed nissan to reset it, I wish I had the software for a palm

you had nissan reset it? hah, you probably got raped.

NightKids · Jul 5, 2004

hey everyone so my ses light came on today and the code was
H02S1 HTR (B1).....0031 can anyone tell me what it is exactly thanks

SR20dee · Jul 6, 2004

cant read can you

see first post

eb_rat_7 · Jul 7, 2004

can anybody answer if this works for all b15s or just ser/V's. i'd like to know if i can use it for my SE.

angel2167882 · Jul 7, 2004

Well the SES light reset method WON'T work for sure on SE neither on XE/GXE up to 2003.5 because it involve the gaz pedal and you have a mecanical cable throttle gaz pedal so you would just flood the engine

But the ABS and Airbag might work thus...

How-To Reset: SES, SRS, ABS Lights

Top Contributors this Month