B15 Sentra Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
I just recently purchase an 05 nissan sentra ser spec-v as a daily drive while my 6.4L charger is in the garage......So what r some parts i can get to put more pep behind this 2.5L.......I already ordered a K&N fendor mount intake....Not looking to do a ton of things as its my dd.....What clutch u guys suggest and flywheel?
 

· Registered
Joined
·
2,679 Posts
welcome aboard!

for starters, hopefully youve made sure that car doesnt have a blown headgasket yet. so first things first, loctite the butterfly valves and get a catless header and use antifouler method. also check the vin for recalls not yet performed. they would be anything from ecu reprogram to new cam & crank sensors.

here's some important info about precat here:
http://www.b15sentra.net/forums/showthread.php?t=135241

it is recommend you at least get a catless header. before it fails and you end up with fried piston rings or a blown headgasket. if you need to semi-rebuild, you rebuild with 07+ parts, it will be stronger than factory.
 

· Registered
Joined
·
2,679 Posts
welcome aboard!

here's some important info about precat here:
http://www.b15sentra.net/forums/showthread.php?t=135241
when your precat in the header fails, dont call nissan, they will laugh at you. hopefully you already read the thread previously posted.

if your going to buy high end products, many redline products are recommend for this vehicle. things like fluid additives, correct gl4 gear oil weight, etc.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top