B15 Sentra Forum banner
1 - 6 of 6 Posts

·
Spec-V Specialist
Joined
·
411 Posts
Discussion Starter · #1 ·
Hey guys. I have been searching the site for a write up on changing the QR25 idler pulley. Yea yea I know take it to the dealer its cover under warrenty. Well I work all the time and only day I can take it there is saturday. On top of that all every saturday is booked for a month.

So I am gonna just change it myself. I searched for a while and have not been able to find a write up or insrtuctions on doing this. Plus I am at work and shouldn't be on b15sentra.net. So Please can some1 direct me to the write up? Thanks
 

·
Boost Addict
Joined
·
3,414 Posts
dydigital said:
Idler or tensioner pulley. I heard it referred to as either name.

ok, jack up car. remove passenger side splash guard. remove passenger side wheel(may not be needed). use 14mm wrench to move tensioner and remove belt. use same 14mm wrench to remove tensioner pulley. install new pulley and use thread lock on bolt. reinstall belt.
 

·
Spec-V Specialist
Joined
·
411 Posts
Discussion Starter · #6 ·
cortrim1 said:
ok, jack up car. remove passenger side splash guard. remove passenger side wheel(may not be needed). use 14mm wrench to move tensioner and remove belt. use same 14mm wrench to remove tensioner pulley. install new pulley and use thread lock on bolt. reinstall belt.
Thanks bro.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top