Registered User
Join Date: Jul 2019
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
|
|
Thread Tools | Rate Thread |
New Member!
Hey guys,
Just got an 05 spec v. Previous owner had quite a few things done to it already. Here is the mod list:
Suspension:
Koni Yellow Shocks set at 55%
1.5in drop Lowering Springs, Rates: 308lbs.in Front / 291lbs.in Rear
25MM Front Swaybar
25MM Rear Swaybar
Delrin Solid Motor Mounts
Delrin Crossmember bushings
TDMI rigid collars
Brakes:
Perfect stop scorched ceramic pads Front&Rear
Brembo Blank rotors
Has rear Brembo package large rotor size and caliper bracket
Drivetrain:
JWT 12lb Flywheel
JWT Heavy Duty Clutch/Pressure Plate
Nismo trans mount short shifter
Self lubricating shifter bushings on both ends of the shifter cables
Engine:
AEM SRI
Intake Plenum spacer
07+ b16 QR25DE Intake Plenum
Hondata Thermal Intake Manifold Gasket
Gutted precat
3" catback
Apexi WS2 Muffler
Cooling:
Koyo Radiator
Koyo Radiator Cap 1.3 Bar
two 12" SPAL fans
Just got an 05 spec v. Previous owner had quite a few things done to it already. Here is the mod list:
Suspension:
Koni Yellow Shocks set at 55%
1.5in drop Lowering Springs, Rates: 308lbs.in Front / 291lbs.in Rear
25MM Front Swaybar
25MM Rear Swaybar
Delrin Solid Motor Mounts
Delrin Crossmember bushings
TDMI rigid collars
Brakes:
Perfect stop scorched ceramic pads Front&Rear
Brembo Blank rotors
Has rear Brembo package large rotor size and caliper bracket
Drivetrain:
JWT 12lb Flywheel
JWT Heavy Duty Clutch/Pressure Plate
Nismo trans mount short shifter
Self lubricating shifter bushings on both ends of the shifter cables
Engine:
AEM SRI
Intake Plenum spacer
07+ b16 QR25DE Intake Plenum
Hondata Thermal Intake Manifold Gasket
Gutted precat
3" catback
Apexi WS2 Muffler
Cooling:
Koyo Radiator
Koyo Radiator Cap 1.3 Bar
two 12" SPAL fans
05 Spec V
'10 Genesis Coupe R Spec
| Thread Tools | |
|
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
| Rate This Thread | |
|
|
| Posting Rules | |