how to remove front seats? - B15sentra.net

MitchSE-R · 05-27-2003, 03:51 PM

well i got some seat covers and i tried my hardest to get them on without removing the seats but it's just too much of a PITA..my fingers are all cut and sore as hell so i think that if i take the seat off it will be much easier..however im unsure of how to do it..from what i can tell the front of the seats are just held in with bolts but how do u get the back part off? thanks

fluid1 · 05-27-2003, 03:55 PM

There's 4 bolts. Move the seat all the way back, take out the front two, and then move the seat all the way forward to take out the back two bolts. It's sooooo easy. And I'll hold my RICE!! comments to myself

MitchSE-R · 05-27-2003, 04:01 PM

ahh i didn't think about moving the seat all the way forward to expose the bolts..thanks

rice? oh please it's not like they're yellow and say R Racing on them or some crap..they're just plain charcoal colored cloth..i only got them cuz my crappy *** ugly "stone" seats are stained to hell

fluid1 · 05-27-2003, 04:30 PM

I'm just messin' with you dude. It's your car

I felt like a dumbass when I was installing my racing seats, too. It took me like 15 minutes to realize how much easier it is if I'd just move the damn seat!!! lol good luck dude.....

IStop4NoMan · 05-29-2003, 02:24 AM

yeah i took apart the seat rail to fabricate for the new seats im putting in, took me twelve hours to do exactly NOTHING! what a waste. i just bought some rails and am waiting for them to be shipped here. I havent had a passenger seat for about a month and a 1/2 now.
Oh yeah its awesome to take out the the front seats when detailing the inside. you'd be amazed what gets under those things.

sonnypippo · 05-29-2003, 08:45 AM

there are four bolts that hold down the seat bracket, which is attached to the seat.

do not attempt to remove just the seat.

MitchSE-R · 05-29-2003, 12:32 PM

yeah i was able to get them out...not too difficult except i broke one of those black pieces that cover up the rear bolts..but oh well..the seat covers actually look pretty nice..they don't fit as well as i would have liked but it's better than stock..thanks for all the help guys

06nissansentra · 05-12-2012, 12:42 PM

what size are the bolts to remove the front passenger seat?

Black B15 · 05-12-2012, 01:38 PM

Quote:

Originally Posted by 06nissansentra

what size are the bolts to remove the front passenger seat?

Knowing Nissan, I would guess either a 10mm or a 12mm. On a side note, I think this should win an award for nearly a decade old thread revival.

06nissansentra · 05-12-2012, 07:02 PM

lol thanks

Black B15 · 05-12-2012, 09:38 PM

Quote:

Originally Posted by 06nissansentra

lol thanks

For sure. After thinking about it, it may even be a 14mm.

2001se2.0 · 05-13-2012, 07:29 AM

i68k · 05-15-2012, 08:23 AM

dont forget about the airbags in the seats if you have the srs tag on your seat!!!

06nissansentra · 05-16-2012, 09:16 PM

no srs tags thanks for the warning though

05-27-2003, 03:51 PM	#1
MitchSE-R You mean coitus? Join Date: May 2002 Location: Athens, GA	how to remove front seats? well i got some seat covers and i tried my hardest to get them on without removing the seats but it's just too much of a PITA..my fingers are all cut and sore as hell so i think that if i take the seat off it will be much easier..however im unsure of how to do it..from what i can tell the front of the seats are just held in with bolts but how do u get the back part off? thanks __________________ All B15 Spring Rates! 2002 Vibrant Blue SE-R \| Alpine CDA-7894 \| 20% Llumar Tint \| Eurolite Bulbs "I once dabbled in pacifism, not in 'Nam of course"

05-27-2003, 03:55 PM	#2
fluid1 Sentra God Join Date: Jun 2002 Location: Red X, bish	There's 4 bolts. Move the seat all the way back, take out the front two, and then move the seat all the way forward to take out the back two bolts. It's sooooo easy. And I'll hold my RICE!! comments to myself __________________ j€Ði Mã§t€® http://adamantmma.blogspot.com

05-27-2003, 04:01 PM	#3
MitchSE-R You mean coitus? Join Date: May 2002 Location: Athens, GA	ahh i didn't think about moving the seat all the way forward to expose the bolts..thanks rice? oh please it's not like they're yellow and say R Racing on them or some crap..they're just plain charcoal colored cloth..i only got them cuz my crappy *** ugly "stone" seats are stained to hell __________________ All B15 Spring Rates! 2002 Vibrant Blue SE-R \| Alpine CDA-7894 \| 20% Llumar Tint \| Eurolite Bulbs "I once dabbled in pacifism, not in 'Nam of course" Last edited by MitchSE-R; 05-27-2003 at 04:03 PM.

05-27-2003, 04:30 PM	#4
fluid1 Sentra God Join Date: Jun 2002 Location: Red X, bish	I'm just messin' with you dude. It's your car I felt like a dumbass when I was installing my racing seats, too. It took me like 15 minutes to realize how much easier it is if I'd just move the damn seat!!! lol good luck dude..... __________________ j€Ði Mã§t€® http://adamantmma.blogspot.com

05-29-2003, 02:24 AM	#5
IStop4NoMan BUY MY CAR!! Join Date: May 2003 Location: Your Bed	yeah i took apart the seat rail to fabricate for the new seats im putting in, took me twelve hours to do exactly NOTHING! what a waste. i just bought some rails and am waiting for them to be shipped here. I havent had a passenger seat for about a month and a 1/2 now. Oh yeah its awesome to take out the the front seats when detailing the inside. you'd be amazed what gets under those things. __________________ Lurking in the shadows....

05-29-2003, 08:45 AM	#6
sonnypippo sonnypippo Join Date: Oct 2001 Location: What up, bish.	there are four bolts that hold down the seat bracket, which is attached to the seat. do not attempt to remove just the seat.

05-29-2003, 12:32 PM	#7
MitchSE-R You mean coitus? Join Date: May 2002 Location: Athens, GA	yeah i was able to get them out...not too difficult except i broke one of those black pieces that cover up the rear bolts..but oh well..the seat covers actually look pretty nice..they don't fit as well as i would have liked but it's better than stock..thanks for all the help guys __________________ All B15 Spring Rates! 2002 Vibrant Blue SE-R \| Alpine CDA-7894 \| 20% Llumar Tint \| Eurolite Bulbs "I once dabbled in pacifism, not in 'Nam of course"

05-12-2012, 12:42 PM	#8
06nissansentra Registered User Join Date: Apr 2011	what size are the bolts to remove the front passenger seat?

05-12-2012, 07:02 PM	#10
06nissansentra Registered User Join Date: Apr 2011	lol thanks

05-13-2012, 07:29 AM	#12
2001se2.0 Swagnificent Join Date: Jun 2007 Location: Nature Coast Florida	__________________ 2000 Sentra SE 2.0 Black (Manual) --17" Katana wheels w/ 205/40-ZR17--JIC-Magic FLT-A2 Coilovers--Drilled/Slotted Rotors--Cold Air Intake--SE-R Headlights--DashZ Tails RIP-2001 Sentra SE 2.0 - Blackout (AKA Faded Glory)

05-15-2012, 08:23 AM	#13
i68k Registered User Join Date: Dec 2006 Location: southeast massachusetts	dont forget about the airbags in the seats if you have the srs tag on your seat!!! __________________ Aztec 02 Nissan Sentra SE-R Spec V, 260k miles blown head gasket @153k, original clutch! mods: optima, foglite mod, disabled auto a/c, dril/slot, es mmi's, jwt bsr, maf w/filter, catless header, ebay n1 catback, alum radiator, s.drives http://imageshack.us/photo/my-images/708/p1010008s.jpg/

05-16-2012, 09:16 PM	#14
06nissansentra Registered User Join Date: Apr 2011	no srs tags thanks for the warning though

Remove Advertisements Sponsored Links
B15Sentra.net Advertisement

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread: